Using our Murakami Mesh Adhesive, stretching your screens has never been easier.

MS-Bond 005, 100, 300, and 600 are each frame adhesives designed for bonding most
types of substrates including mesh to frame. The low viscosity allows for rapid penetration
between the mesh and the frame for rapid curing.
Surfaces to be bonded must be clean and dry.

ADVANTAGES:

1. Ideal for bonding fabric to wood, aluminum, plastics, and all types of metal.
   
2. Excellent strength for large format frame sizes. The overlap sheer tension is in excess o
   3000lbs. in order to provide a longer lasting bond.
3. Rapid curing.

APPLICATION:

Step 1:
Make sure bonding surfaces are clean and dry. Stretch the mesh on your stretching device.

Step 2.
Apply an even layer of instant adhesive using the applicator tip rovided. Spread evenly and smoothly with a small squeegee. Though cure is initiated on contact, most bonds will achieve full cure in 24 hours. An application of MS-Bond Activator will cure and bond the surfaces together instantly.

MS-Bond Frame Adhesive

MS Bond frame adhesives MS-Bond 005, 100, and 300 are designed for the bonding of screen mesh to frame. The low viscosity allows for easy penetration through the mesh and to the frame for rapid curing. Surfaces to be bonded must be clean and dry prior to gluing mesh to frame. Green areas in chart are recommended mesh counts for the glue viscosity

Activator

Once a thin coat of MS-Bond has been applied to mesh and frame, MS-Bond Activator can be sprayed onto wet glue for instant bonding.