Dynamic Supply Inc. :: Emulsions

emulsions
What type of emulsion are you looking for? There are two types of emulsion we offer: 1-part and 2-part. The difference between the two emulsions is simple. 1-part emulsions are pre-sensitized. That means they are ready to go right out of the container. They also have a shelf life of 6 months to a year (depending on how well your store it). This emulsion is extremely light sensitive. If your emulsion is exposed to light, chances are the entire container will go bad. 2-part emulsions are un-sensitized. That means you must add the sensitizer to the emulsion. Once you add in the sensitizer, the emulsion will have a shelf life of 4-6 weeks. This emulsion is not as light sensitive as 1-part, but should not exposed to light for a long duration of time.
1-Part
IMAGE MATE PC-701 Possibly the fastest exposing one-part available, PC 701 also has the highest known solids content of any emulsion! Testing has shown PC 701 to expose more than 3 times faster than other SBQ emulsions. With extremely high 52% solids, this SBQ emulsion allows you to use minimal coatings and create high-density stencils of 400+ microns, replacing more expensive capillary films. It offers textile printers excellent resistance to plastisol ink, easy reclaimability and an extended shelf life.

MURAKAMI PHOTOCURE BLU Excellent detail and resolution. Coats easily, produces durable stencils. Exposes well on a variety of exposure systems. Good choice for manual printers or automatic shops. Excellent EOM on first coating.

MURAKAMI HV (HIGH VISCOSITY) Murakami’s latest textile emulsion, Aquasol HV excels at textile printing. Fast exposing, easy to coat, with outstanding resolution and definition. Excels at printing plastisol, waterbase, and discharge ink systems. (Use of hardeners recommended for waterbase and discharge.
2-Part
IMAGE MATE DZ-343 A violet diazo cure photoemulsion for water-based and plastisol inks. DZ 343 can withstand thousands of prints without the use of chemical hardeners and still reclaim easily. At 48% solids, 200+ micron stencils are easily achieved. DZ 343’s combination of faster exposure speeds, medium viscosity and high durability gives printers even greater versatility and value. Freeze/thaw stable.

MURAKAMI SP-7500 SP-7500 is a premium dual cure textile emulsion. It provides excellent resolution and definition. Easy to develop, it has a wide exposure latitude and creates a flexible durable stencil for long run textile printing.